Double bottom pattern
The double bottom pattern on a real chart
The double bottom pattern is a bullish reversal pattern: after a decline, price touches a similar level twice and in between rallies to a high, the peak that acts as the neckline. You recognize it by two lows no more than 3% apart, and it is confirmed only when price closes above that peak.
The whole pattern. The criteria are counted on prices, not by eye. Pick a piece: the chart stops at its day, the future is hidden.
How do you identify a double bottom pattern?
It is shaped like a W. Murphy lists it among the major reversal patterns, next to the head and shoulders and the triple bottom. Edwards and Magee insist on confirmation: until price clears the peak in between, two nearby lows are not the pattern yet. The thresholds on this page are our own: written rules, to recognize it with a calculation and not by eye.
Fig. 1 · The pattern and its pieces
- A decline to reverse. Without a fall first, two lows in a row reverse nothing.
- Two troughs at the same level. The second fall stops where the first one did. The tolerance says how far apart they can be.
- The peak in between is the neckline. A horizontal line on the high between the two troughs. As long as price stays below it, the pattern is a hypothesis.
- The height gives the measure. From the lower low to the neckline: added above the breakout, it gives the textbook target.
Double bottom rules, threshold by threshold
Next to each rule: Texas Instruments, the case on the chart above1The decline before
- The first low is at least 12% below the highest close of the 80 sessions before.
- It is a reversal pattern: there must be something to reverse.
First low 24% below the high before · see it on the chart
2The tolerance
- The two lows are at most 3% apart, measured over their average.
- Each trough is the lowest point of its stretch: no low beneath it, up to the peak.
Lows at $71.44 and $71.89: 0.6% · see it on the chart
3The time between
- Between 20 and 200 sessions pass from one low to the other.
- Two lows a few days apart are a single low.
40 sessions between the two troughs · see it on the chart
4The peak in between
- It is the highest high between the two troughs: the neckline runs through it.
- It sits at least 10% above the lower low.
Peak at $84.09: 17.7% above · see it on the chart
5The second low holds
- After the second low, before the breakout, price does not fall beneath it again.
- A lower low changes the pattern: it is no longer double.
No low under $71.89 before the breakout · see it on the chart
6The breakout
- A close at least 1% above the neckline, within 40 sessions of the second low.
- That is when the pattern exists. Not before.
A close at $85.59: · see it on the chart
7Breakout volume
- At least 1.3 times the average of the 50 sessions before.
- A rise needs new buyers: they show up in the trading.
Volume 1.55 times the average · see it on the chart
The tolerance: how close must the two lows be?
Fig. 2 · Three second troughs, one threshold
- Almost never identical. On a real chart two lows at the same cent are rare. A written tolerance is needed.
- Here it is 3%. Take the gap between the two lows and divide it by their average. Textbooks use numbers that are close, not identical.
- Beyond the threshold it is another pattern. A much higher second low is a higher low; a much lower one is a new low in the decline.
On Texas Instruments the two lows are $71.44 and $71.89: 0.6% apart. On Amazon, 0.0%. The threshold on this page is 3%: on the chart at the top it is the dashed amber line.
What volume does a double bottom need?
Fig. 3 · How volume usually behaves
- Trading is heavy on the first low. It is the end of the fall: those who sell in a hurry sell there.
- On the second it often shrinks. Price comes back down on less trading: selling pressure has eased.
- At the breakout it must grow. The classic textbooks ask for rising volume when price clears the peak. The general picture is in volume analysis.
On Texas Instruments the volume on the breakout day is 1.55 times the average of the 50 sessions before. The threshold on this page is 1.3: on the chart at the top it is the amber bar.
When is a double bottom confirmed?
Fig. 4 · The same neckline, two different days
- The close is what counts. A high above the neckline says price got there, not that it stayed.
- A margin is required. At least 1% above the peak: a filter against breakouts of a few cents.
- Before the breakout it is not a double bottom. On the second low the pattern does not exist yet: price can keep falling and make a new low.
On Texas Instruments the second low comes on ; the close above the neckline 20 sessions later, on . In between, the pattern was only a hypothesis.
How do you calculate the double bottom target?
Fig. 5 · The target is a convention, the stop a level that disproves
- The height carried upward. From the lower low to the neckline: it is added to the neckline. It is the textbook measuring rule, a convention and not a promise.
- Price can stop earlier, or go further. The target is there to compare the possible distance with that of the stop, not to forecast.
- The stop sits below the two lows. If price closes under them, the pattern no longer exists. The stop loss is decided beforehand.
On Texas Instruments: neckline $84.09, lower low $71.44, height $12.65. The measured target is $96.74; the stop below the lows, $71.44.
The pullback to the neckline
Fig. 6 · Old resistance acts as support
- After the breakout price can come back. It rises, then falls again to touch the neckline from above.
- The neckline changes job. It used to stop the rises, now it can stop the falls: it is role reversal of support and resistance seen up close.
- It is not required. Price may not return. Here a pullback counts if within 30 sessions price goes 3% above the neckline and comes back to within 1.5%.
On Texas Instruments 2018-19 the pullback reaches $84.37: . see it on the chart
Double bottom vs triple bottom vs double top: what is the difference?
The triple bottom has three troughs at the same level instead of two. The double top is the mirror image, at the top: two peaks after a rise and a breakdown. The inverse head and shoulders has three lows, but the middle one falls further than the others. Bulkowski also sorts double bottoms by the shape of the two troughs: narrow and pointed (Adam) or wide and rounded (Eve).
Fig. 7 · Two troughs, three troughs, two peaks
- The double bottom has two troughs. The second fall stops where the first one did. The neckline runs through the single peak in between.
- The triple bottom has three. The level holds one more time. The confirmation line runs through the peaks between the troughs.
- The double top is upside down. Two peaks after a rise, confirmed by a close below the trough in between: it is bearish.
When the double bottom fails
Fig. 8 · The breakout happens, the follow-through does not
- A breakout does not guarantee what follows. Price can close above the neckline, rise a little and come back down.
- The line is the two lows. Here the pattern has failed when price closes under the lower low before touching the target.
- That is what the stop is for. Knowing beforehand where the pattern is disproved limits the damage of a wrong reading.
Amazon 2021: a close at $184.80 above the neckline, . But price closes below the lows, $158.79, before touching the target: . see it on the chart
Double bottom mistakes to avoid
Calling it before the breakout
- On the second low the pattern does not exist yet: there is a bounce.
- The decline can resume and make a new low.
Looking for it without a decline
- Two lows inside a rise reverse nothing.
- First look at where price is coming from.
Troughs too different
- Beyond the tolerance the two lows draw something else.
- Thresholds are there to say no.
Troughs too close
- Two lows a few days apart are the same trough.
- Time is needed between the two falls.
Ignoring volume
- A breakout on little trading shows no new buyers.
- It is the first suspect to check.
The target as a promise
- The height carried upward is a convention, not an appointment.
- Price can stop earlier.
Deeper dives: The inverse head and shoulders · Support and resistance · Volume · The stop loss · The take profit · The trend.
Interactive exerciseTry it: find the double bottom
Three clicks on the real chart: the two troughs and the neckline; the page judges criterion by criterion- Click the first low: the first trough after the decline.
- Click the peak in between: the neckline runs through it.
- Click the second low: the trough after the peak, before the breakout.
Click the first low. The circle snaps to the nearest low.
Where to go from here
Chart patternsThe other lessons in the Β«Chart patternsΒ» section
Head and shoulders
- a bearish reversal pattern: three peaks and the neckline
- two real examples: one that worked, one that failed
- work out the measured target
Inverse head and shoulders
- Three lows after a decline, the head the lowest, a close above the neckline.
- The rules as thresholds: shoulders, head, neckline, volume.
- The target is a measure, the stop sits below the right shoulder.
Ascending triangle pattern
- A flat resistance, ever higher lows, a close above.
- The rules as thresholds: flatness, higher lows, volume.
- The target is the triangle height, the stop goes below the second low.
Bull flag pattern
- A sharp move, a tight channel against it, a close outside.
- The rules as thresholds: pole, pullback, volume.
- The target is the length of the pole, the stop goes beyond the end of the flag.
Frequently asked questions
What is a double bottom pattern?
It is a W-shaped bullish reversal pattern: after a decline, price makes two lows at a similar level with a peak in between. The horizontal line on that peak is the neckline, and a close above it confirms the pattern.
Is a double bottom bullish or bearish?
It is bullish: it points to the possible end of a decline. Its bearish mirror is the double top, shaped like an M, which appears after a rise.
When is a double bottom confirmed?
When price closes above the peak between the two troughs. On this page the close must clear it by at least 1%, within 40 sessions of the second low. Until then the two lows are only a hypothesis.
How do you calculate the double bottom target?
Measure the height, from the lower low to the neckline, and add it to the neckline. On Texas Instruments: 84.09 plus 12.65 makes 96.74. It is a textbook convention, not a promise: price can stop earlier.
What is the difference between a double bottom and a triple bottom?
The double bottom touches the level twice, the triple bottom three times. They read the same way: the pattern is confirmed only by a close above the line of the peaks in between.
Method and sources
| Source |
|---|
| John J. Murphy, Technical Analysis of the Financial Markets, chapter 5, major reversal patterns: double and triple bottoms |
| Robert D. Edwards, John Magee, Technical Analysis of Stock Trends: double bottoms as reversal patterns, confirmation above the middle peak and breakout volume |
| Thomas N. Bulkowski, Encyclopedia of Chart Patterns (Wiley): double bottoms and their shapes, Adam and Eve |
EOD archive of daily sessions: prices adjusted for dividends and corporate actions, so the proportions are real but the levels do not match the quotes read at the time. The examples (Texas Instruments 2018-19 and Amazon 2021) were found by this pageβs rule on stock series since 2014: zig-zag pivots at 7% for the candidates, then the thresholds written above. The page repeats the search at every build and checks that volume does not jump because of a split inside the window. This guide explains how the tools work: it does not contain investment recommendations and promises no returns. Our method · license · report an error.
DOMINA’s stock pages, indices and commodities are rebuilt every night. Leave your email: we write to you when the picture changes.
No third-party advertising. Unsubscribe with one click. Go to the platform →With your consent we use Google Analytics cookies to count visits. If you decline, the page works the same and no measurement cookie is set. Cookie policy